The Kendon Dual-Rail Ride-Up SRL Folding Stand-Up Motorcycle Trailer is designed for riders who need to transport one or two full-size motorcycles while conserving garage space. This neutral, fact-based overview summarizes its published features and specifications.
Overview
The Dual-Rail Ride-Up SRL belongs to Kendon’s Ride-Up SRL Series. “SRL” refers to Suspension Reactive Loading, a loading approach where the trailer’s suspension compresses as a motorcycle rides up the ramp to reduce the ramp-to-deck transition angle. When the motorcycle is secured, the suspension returns to a level position for travel.
The platform supports two side-by-side full-size motorcycles. The trailer folds vertically and stands on integrated casters to conserve floor space, making it practical for storage in many home garages or workshops.
Carrying Capacity
Published capacity is 2,000 lb (combined). Each rail accommodates one motorcycle, and the frame/suspension are configured for balanced towing within the rated load.
Trailer Weight & Towing
The empty trailer weight is approximately 460 lb. Within typical towing guidelines, this weight can be handled by a range of vehicles equipped with a Class II (or higher) hitch, subject to vehicle-specific ratings. When folded upright, the trailer can be repositioned in storage using its integrated casters.
Dimensions & Storage Profile
- Length: 123 in
- Width: 86 in
- Folded height: 93.5 in
- Folded depth: ~27 in
When folded upright, the trailer’s floor footprint is similar to a tall cabinet or tool chest. Users should confirm ceiling clearance and any overhead obstructions before vertical storage.
Ride-Up SRL Loading
The Ride-Up SRL configuration allows riders to ride the motorcycle up the ramp and onto the deck. As the front wheel moves onto the trailer, suspension compression helps minimize the ramp apex. After tie-down, the suspension levels for towing.
Ramp & Deck
The Dual-Rail model includes an extra-wide, three-piece folding ramp that mounts to the deck for loading and folds for transport/storage. The deck uses a combination of expanded metal mesh and diamond-plate sections for traction and reinforcement. Kendon notes rear-section and over-the-axle foot extensions to provide stable foot placement alongside the motorcycle during loading and unloading.
Suspension
The trailer utilizes independent torsion-bar suspension rather than leaf springs. This configuration allows each wheel to react to road inputs independently, supporting stable towing whether one or two motorcycles are carried.
Frame & Finish
Kendon specifies a patented steel-tube chassis with triangulated geometry. The frame is powder-coated with multiple gloss color options. Powder coat provides a durable finish for typical road and storage environments.
Wheels, Tires & Lighting
Published equipment includes 13-inch aluminum wheels with radial tires, and a DOT-approved lighting package (brake, running, and turn signals) routed through the frame via a standard wiring harness.
Towing & Tie-Down Points
The coupler is specified at 2 in for compatible hitches (typically Class II or higher; vehicle ratings should be verified). The frame includes multiple tie-down points and safety chains for standard towing practice.
Maintenance
- Check tire pressure and tread condition before use.
- Inspect wheel bearings periodically.
- Verify ramp hinges/fasteners for tightness.
- Confirm lighting function (brake/turn/running) prior to towing.
- Keep the powder-coated frame clean and protected.
Specifications Summary
| Category | Specification |
| Carrying Capacity | 2,000 lb (combined) |
| Empty Weight | ~460 lb |
| Length | 123 in |
| Width | 86 in |
| Folded Height | 93.5 in |
| Folded Depth | ~27 in |
| Suspension | Independent torsion-bar |
| Wheels | 13-inch aluminum |
| Tires | Radial |
| Finish | Powder coat (gloss color options) |
| Lighting | DOT-approved |
| Coupler | 2 in (vehicle/hitch ratings apply) |
Frequently Asked Questions
Can the Dual-Rail carry two full-size motorcycles?
Yes. The published combined capacity is 2,000 lb with two rails designed for side-by-side loading.
What is the folded storage footprint?
Approx. 93.5 in standing height and ~27 in floor depth (users should verify garage ceiling clearance).
What hitch size is used?
A 2-inch coupler is specified. Always confirm your vehicle’s hitch class and towing ratings.
What type of suspension is used?
Independent torsion-bar suspension, which allows each wheel to react individually to road inputs.